How do I reset the gyroscope in Presenter?

When the Status light flashes Green/Red for 5 seconds, this indicates that the Gyro needs calibration. Turn Presenter off and, holding the Previous Slide key, turn it back on. The Status Light will slowly flash Green/Red for 10 seconds while Presenter is calibrating, then turn solid Green for 3 seconds, indicating a successful recalibration of Presenter’s gyroscope.

How do I pair the USB receiver to the handset?

The Handset is paired with the USB receiver at the factory prior to shipping. Should re-pairing become necessary, plug the Presenter UHF Receiver Dongle into an available USB port on your computer, press and hold the CONNECT button on the handset for 3 seconds. The Status light will alternatively flash Green & Red until paired: or will go off after 1 minute if pairing has failed.

What does Presenter’s “Status” light indicate?

  • Power on – The Status light will turn Green for 3 seconds, then turn off.
  • Pairing Mode – The Status light will alternatively flash Green & Red until paired: or will go off after 1 minute if pairing has failed. Pairing must be initiated (by pressing the connect button on the handset) within 1 minute of plugging the USB receiver into your system.
  • Pairing Success – The Status light will flash 3 times, then turn off when pairing is successful.
  • Low Battery – Low battery warning will be indicated by slow Red flash every 3 seconds, until the power is drained out or the power turned off.
  • Laser On / Warning – While the laser button is pressed and the laser is on, the Status light will light up Green.
  • Gyro Calibration – The Status light will alternatively flash Green & Red for 5 seconds to indicate that the Gyro is in need of calibration.