alt iPad Accessories alt Keyboards alt Mice / Touchpad alt Audio / Visual alt Graphic Tablets alt Scanners alt Webcams

Optical Laser Barcode Scanner

Optical Laser Barcode Scanner

Model: NuScan 3200U

Manual:

1. What to do if the scanner has no response?

2. What to do if the scanner needs to be programmed with different terminator?

3. What to do if the scanner needs to be programmed for reading check digit?

4. What to do if the scanner needs to be programmed for truncation?

5. What to do if the scanner needs to be programmed for adding "Alt + F12"?

6. What to do if the scanner needs to be programmed for adding "Comma"?

7. What to do if the scanner cannot read the ISBN barcode?

8. Why wont my barcode scanner show any scans in my own software?


 

1. What to do if the scanner has no response?

The device is designed as plug-and-play which has no driver available for installation and customized settings.

For USB Connection:

 

1. Plug in the USB cable when Windows is fully loaded

2. Connect the USB cable or ports with any adapter, hub, or switch is not recommended


Please download and print out the programming manual first and then perform the instruction below to reset the scanner.

On page 8 from the booklet "NuScan 3200 Programming Manual"(page 10 in Adobe Reader), scan the barcode:

RESET CONFIGURATION TO DEFAULTS

 

If the connection is secured and one of the following issues takes place, then it could be a defective item:

Device has no response at all

The pins in the connector are bent or damaged

An error message indicates that the device is malfunction

An error message indicates that the device cannot be recognized


>Back to top


 

2. What to do if the scanner needs to be programmed with different terminator?

Please download and print out the programming manual first and then perform the instruction below to reset the scanner.

On page 8 from the booklet "NuScan 3200 Programming Manual"(page 10 in Adobe Reader), scan the barcode:

RESET CONFIGURATION TO DEFAULTS

 

In the PDF file: "NuScan 3200 TAB-all S", scan the barcode:

Set "None" as terminator:

STRING -- DISABLE

 

Set "Tab" as terminator:

ALL CODE -- TAB

>Back to top


 

3. What to do if the scanner needs to be programmed for reading check digit?

Please download and print out the programming manual first and then perform the instruction below to reset the scanner.

On page 20 from the booklet "NuScan 3200 Programming Manual"(page 22 in Adobe Reader), scan the barcode:

UPC/EAN SUPPLEMENTS - 2 & 5 DIGIT

>Back to top


 

4. What to do if the scanner needs to be programmed for truncation?

Please download and print out the programming manual first and then perform the instruction below to reset the scanner.

In the PDF file: "NuScan 3200 Interleave 25 setting code", scan the barcode based on the need.

>Back to top


 

5. What to do if the scanner needs to be programmed for adding "Alt + F12"?

Please download and print out the programming manual first and then perform the instruction below to reset the scanner.

In the PDF file: "NuScan 3200 ALT F12 setting code", scan the barcode based on the need.

>Back to top


 

6. What to do if the scanner needs to be programmed for adding "Comma"?

Please download and print out the programming manual first and then perform the instruction below to reset the scanner.

In the PDF file: "NuScan 3200 Comma setting code", scan the barcode based on the need.

>Back to top


 

        7. What to do if the scanner cannot read the ISBN barcode?

Please download and print out the programming manual first and then perform the instruction below to reset the scanner.

Scan the barcode below:

On page 8 from the booklet "NuScan 3200 Programming Manual"(page 10 in Adobe Reader)

RESET CONFIGURATION TO DEFAULTS

 

On page 19 from the booklet "NuScan 3200 Programming Manual"(page 21 in Adobe Reader)

CONVERT EAN-13 TO ISBN ENABLE

>Back to top


 

8. Why wont my barcode scanner show any scans in my own software? 

















Please confirm first if this occurs in NotePad, EXCEL or MS WORD or if it is occurring in JUST your 3rd party software application
Please provide a sample of your barcode to our Technical Support Dept if it is NOT scanning in 1 of the 3 programs I have mentioned. 

If it is NOT scanning in ONLY 3rd party software, you would need to contact that company to see what they recommend the configuration is 
since ALL 3rd party software requires some sort of configuration be done on the barcode scanner to be implemented with their software. 


>Back to top



© Copyright 2014, Adesso Inc. All rights reserved